NETGEAR Nighthawk SX10 Pro Gaming

The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select SWITCHING.
The QOS page displays.
5.
From the menu on the left, select LAG.
The LAG page displays.
6.
Click the tab for the LAG that you want to enable.
The text in the tab for the selected LAG displays green.
7.
Click the Disable/Enable button.
When the LAG is enabled, the button bar displays green.
8.
Click the APPLY button.
Your settings are saved.
Change the IP Address of the Switch
By default, the switch receives an IP address from a DHCP server (or a router that
functions as a DHCP server) in your network.
To disable the DHCP client of the switch and change the IP address of the switch
to a fixed IP address:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
Below the SYSTEM INFO pane, select DHCP.
The IP address fields display but you cannot change them yet. The button bar in the
DHCP section displays green because the DHCP client of the switch is enabled.
User Manual83Manage the Switch in Your
Network
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX