NETGEAR Nighthawk SX10 Pro Gaming

it processes. A port that functions in trunk mode automatically belongs to all
VLANs on the switch and tags the traffic that it processes.
-
Advanced 802.1Q VLAN. In an advanced 802.1Q VLAN configuration, VLAN 1
is added to the switch and all ports (1 through 10) are untagged members of
VLAN 1. You can tag ports, untag ports, exclude ports, add more VLANs, assign
a different VLAN to a port, manage port PVIDs, and manage a voice VLAN.
The following table provides an overview of VLAN features that are supported on the
switch.
Table 3. Supported VLAN modes
Advanced
802.1Q VLAN
Basic
802.1Q VLAN
Advanced
Port-Based VLAN
Basic
Port-Based VLAN
VLAN Feature
64101010Total number of
VLANs
YesYes (trunk port only)NoNoEgress tagging
YesYes (trunk port only)YesNoMultiple VLANs on a
single port
YesNoNoNoVoice VLAN
Activate the Basic Port-Based VLAN Mode
and Assign VLANs
By default, all types of VLANs are disabled on the switch.
When you activate the Basic Port-Based VLAN mode, VLAN 1 through VLAN 10 are
added to the switch (because the switch provides a total of 10 ports) and all ports are
made members of VLAN 1. This is the default VLAN in the Basic Port-Based VLAN mode.
In the Basic Port-Based VLAN mode, you can assign each port (other than the uplink
port) to a single VLAN only.
To activate the Basic Port-Based VLAN mode and assign VLANs:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
User Manual51Use VLANS for Traffic
Segmentation
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX