To apply the Gaming Preset mode:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
Select SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5.
Select GAMING PRESET.
The PREVIEW GAMING PRESET section shows the current settings and the settings
for the Gaming Preset mode.
6.
Click the APPLY button.
Your settings are saved.
Apply the Media Streaming Preset Mode
The Media Streaming Preset mode maximizes the throughput of traffic that the switch
manages so that streaming media such as music, videos, and movies can be processed
very quickly. If you use the Media Streaming Preset mode, be sure that you connect the
uplink to your router to port 1 and your media streaming device to port 9.
Applying the Media Streaming Preset mode does the following:
•
Sets the QoS port priority for ports 1 and 9 to High (P7) (for more information, see
Set the Priority for a Port on page 43).
•
Sets the QoS port priority for ports 2 through 8 and port 10 to Low (P0) (for more
information, see Set the Priority for a Port on page 43).
•
Enables IGMP snooping for the switch (for more information, see Manage IGMP
Snooping on page 76).
•
Disables flow control for all ports (for more information, Manage Flow Control for a
Port on page 44).
•
Disables power saving for the switch (for more information, see Manage the Power
Saving Mode on page 93).
•
Sets the QoS mode to Port-Based (for more information, see Use Port-Based Quality
of Service and Set Port Priorities on page 38).
User Manual30Optimize the Switch
Performance
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
To Next Page
Loading...
