NETGEAR Nighthawk SX10 Pro Gaming

3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5.
Click the SAVE tab.
The SAVE PRESET MODES page displays.
6.
In the Preset Mode Name field, enter a name from 1 to 16 characters for the custom
preset mode.
7.
Select the Slot 1 or 2 button.
You can save two custom preset modes, one in each slot.
8.
Click the APPLY button.
Your settings are saved. The preset custom mode is displayed on the PRESET MODES
page.
Apply a Custom Preset Mode
If you previously saved QoS, port prioritization, multicast, flow control, IGMP snooping,
and rate limiting settings as a custom preset mode (see Save Your Quality of Service
Settings as a Custom Preset Mode on page 34), you can apply the preset mode.
To apply a previously saved custom preset mode:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5. Select a custom preset mode.
The PREVIEW section shows the settings for the custom preset mode.
User Manual35Optimize the Switch
Performance
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX