NETGEAR Nighthawk SX10 Pro Gaming

•
Disables rate limiting for all ports (for more information, see Set Rate Limits for a Port
on page 42).
•
Sets the LEDs to the streaming color scheme (for more information, see Manage the
LEDs on page 94).
Before you apply the Media Streaming Preset mode, you can save your current QoS,
port prioritization, multicast, flow control, and IGMP snooping settings and other settings
as a custom preset mode (see Save Your Quality of Service Settings as a Custom Preset
Mode on page 34) so that you can easily revert to your current QoS configuration.
To apply the Media Streaming Preset mode:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
Select PRESET MODES.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5.
Select MEDIA STREAMING PRESET.
The PREVIEW MEDIA STREAMING PRESET section shows the current settings and
the settings for the Media Streaming Preset mode.
6.
Click the APPLY button.
Your settings are saved.
Apply the Standard Preset Mode
The Standard Preset mode, which is the default mode, gives all ports equal priority.
Applying the Standard Preset mode does the following:
•
Sets the QoS port priority for all ports to Medium(P4) (for more information, see Set
the Priority for a Port on page 43.
•
Enables IGMP snooping for the switch (for more information, see Manage IGMP
Snooping on page 76).
•
Disables flow control for all ports (for more information, Manage Flow Control for a
Port on page 44).
User Manual31Optimize the Switch
Performance
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX