NETGEAR Nighthawk SX10 Pro Gaming

•
Color. By default, the color of the Power LED is orange. To change the color, do
the following:
a. Below Power LED Color, click the color icon.
b.
Select one of the predefined colors. (The default color orange is among the
predefined colors.) Or, to create your own color, click the Other menu, and
click a color in the color circle.
7.
Click the SAVE button.
Your settings are saved.
View System Information
You can view basic information about the switch, such as the firmware version, switch
name, MAC address, serial number, and model number.
To view basic information about the switch:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
By default, the SYSTEM INFO pane is expanded and shows the basic system
information.
Change the Switch Device Name
By default, the device name of the switch is Nighthawk SX10. This device name shows
in, for example, Windows Explorer and Bonjour. You can change the device name,
which can be up to 20 characters.
To change the device name of the switch:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
User Manual99Maintain and Monitor the Switch
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX