NETGEAR Nighthawk SX10 Pro Gaming

Manage Individual Port LEDs
The switch lets you manage the following settings for individual port LEDs (also referred
to as Activity LEDs):
•
Activity. By default, a port LED lights when you connect a powered-on device to
the port. You can disable the LED.
•
Frequency. By default, the frequency with which a port LED lights is high. You can
choose from four other frequency settings.
•
Color. The LED default color depends on the connection speed. For each connection
speed, you can select a predefined color or create your own color.
•
Brightness. By default, the LED brightness is high. You can lower the brightness.
To manage individual port LEDs:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
Below the SYSTEM INFO pane, select LED.
By default, the PORT ACTIVITY LEDS tab is selected and the ACTIVITY LEDs page
displays.
5.
Click the number for the port LED that you want to manage.
The LED settings for the port display.
6.
Specify the following settings:
•
Activity. By default, the port LED lights when you connect a powered-on device
to the port. To disable the port LED, click the ACTIVITY LED button.
When the LED activity is enabled, the button bar display green. When it is
disabled, the button bar displays white.
•
Frequency. By default, the frequency with which a port LED lights is high. To
change the frequency, select another setting from the Frequency menu.
User Manual95Maintain and Monitor the Switch
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX