NETGEAR Nighthawk SX10 Pro Gaming

•
LED button. One button to turn the Power LED and port LEDs on and off. When the
LEDs are turned off, we refer to that mode as Stealth Mode.
Note: The RESET button is located on the bottom panel of the switch. Press the RESET
button for five seconds to reset the switch to factory default settings. For more
information, see Use the RESET Button to Reset the Switch on page 90.
Switch Label
The switch label on the bottom panel of the switch shows the serial number, MAC
address, default login information, and other information for the switch.
Figure 4. Switch label
Safety Instructions and Warnings
Use the following safety guidelines to ensure your own personal safety and to help
protect your system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,
observe the following precautions:
•
This product is designed for indoor use only in a temperature-controlled and
humidity-controlled environment. For more information, see the environmental
specifications in the appendix or the data sheet.
User Manual11Hardware Overview of the
Switch
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX