The HOME page displays.
4.
From the menu at the top of the page, select SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5. Select a custom preset mode.
The PREVIEW section shows the settings for the custom preset mode.
6.
Click the DELETE button.
Your settings are saved. The custom preset mode is removed from the PRESET
MODES page.
Manually Set the Quality of Service Mode
and Port Rate Limits
Instead of using preset performance modes, you can manually set the Quality of Service
(QoS) modes to manage traffic:
•
Port-based QoS mode. Lets you set the priority to low with priority 0, low with
priority 1, normal with priority 2, normal with priority 3, medium with priority 4,
medium with priority 5, high with priority 6, or high with priority 7 for individual port
numbers and lets you set rate limits for incoming and outgoing traffic for individual
ports. If broadcast filtering is enabled, you can also set the storm control rate for
incoming traffic for individual ports.
•
802.1P/DSCP QoS mode. Applies pass-through prioritization that is based on
tagged packets and lets you set rate limits for incoming and outgoing traffic for
individual ports. If broadcast filtering is enabled, you can also set the storm control
rate for incoming traffic for individual ports.
This QoS mode applies only to devices that support 802.1P and Differentiated
Services Code Point (DSCP) tagging. For devices that do not support 802.1P and
DSCP tagging, ports are not prioritized but the configured rate limit is still applied.
You can limit the rate of incoming traffic, outgoing traffic, or both on a port to prevent
the port (and the device that is attached to it) from taking up too much bandwidth on
the switch. Rate limiting, which you can set for individual ports in either QoS mode,
simply means that the switch slows down all traffic on a port so that traffic does not
exceed the limit that you set for that port. If you set the rate limit on a port too low, you
might, for example, see degraded video stream quality, sluggish response times during
online activity, and other problems.
User Manual37Optimize the Switch
Performance
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX