To manage the power saving mode on the switch:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, to the right of NETGEAR, click the three-dot
icon and select Power Saving.
The POWER SAVING pop-up window opens.
5. Enable or disable the power saving mode by clicking the button.
When the power saving mode is enabled, the button bar displays green.
(You do not need to click an APPLY button.)
Manage the LEDs
You can customize your visual environment by managing the color and activity of the
Power LED and many settings for the port LEDs (also referred to as Activity LEDs). The
LED settings do not affect the way in which traffic is switched.
In addition to the Power LED, you can manage either individual port LEDs or a group
of port LEDs simultaneously. You can also reset all port LEDs to default settings.
Note: To turn off all LEDs entirely (referred to as Stealth Mode), press the LED button
to the left of port 10 on the back of the switch (see Back Panel on page 10).
The switch functions with the following default color schemes, which you can customize:
•
Standard color scheme. In the Standard Preset mode (which is the default mode),
the switch uses a color scheme with a purple and dark blue color palette. The Power
LED is orange.
•
Gaming color scheme. In the Gaming Preset mode, the switch uses a color scheme
with a yellow and green color palette. The Power LED is green.
•
Streaming color scheme. In the Media Streaming Preset mode, the switch uses a
color scheme with a light blue color palette. The Power LED is light blue.
User Manual94Maintain and Monitor the Switch
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
To Next Page
Loading...
