NETGEAR Nighthawk SX10 Pro Gaming

7. To optimize the gaming setting by either reprioritizing or blocking an individual port,
do the following:
a.
Right-click the small square port icon at the bottom of the graph.
This is not the larger rectangular port block below the horizontal bar of the graph,
but the smaller square port icon below that.
A pop-up menu opens.
b.
Make one of the following selections:
•
Block. The port is blocked, that is, shut down. No traffic can go through the
port.
This option displays only if the port is not blocked.
•
Unblock. The port is unblocked. Traffic can go through the port.
This option displays only if the port is blocked.
•
Set to Highest Priority. The port is set to the highest priority.
Whether the switch functions in the Port-Based QoS mode or the 802.1P/DSCP
QoS mode, you can set the port to the highest priority. For information about
reprioritizing the port to a specific priority, see Set the Priority for a Port on
page 43.
Manage Custom Performance Preset Modes
You can save your current Quality of Service (QoS) settings as a custom preset mode,
including the settings for IGMP snooping, flow control, the power saving mode, the
QoS mode, rate limiting, and the priorities of the individual ports.
The switch lets you save two custom preset modes. You can also rename or delete these
custom preset modes.
Save Your Quality of Service Settings as a Custom Preset
Mode
You can save your current Quality of Service (QoS) settings as a custom preset mode
that you can reapply later.
To save your QoS settings as a custom preset mode:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
User Manual34Optimize the Switch
Performance
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX