NETGEAR Nighthawk SX10 Pro Gaming

Basic Technical Specifications
The following table shows the basic technical specifications of the switch.
For more specifications, see the data sheet that you can download by visiting
netgear.com/support/download/.
Table 6. Basic technical specifications
DescriptionFeature
Two RJ-45 ports (ports 1 and 2) supporting 100BASE-TX, 1000BASE-T,
2.5GBASE-T, 5GBASE-T, or 10GBASE-T
Eight RJ-45 ports (ports 3 through 10), supporting 10BASE-T, 100BASE-TX, or
1000BASE-T
Network interfaces
For 100 Mbps, use a Category 5 (Cat 5) or higher-rated cable.Network cable
For 1 Gbps, 2.5 Gbps, or 5 Gbps, use a Category 5e (Cat 5e) or higher-rated
cable.
For 10 Gbps for up to 55 meters (180 feet), use a Category 6 (Cat 6) or
higher-rated cable.
For 10 Gbps for more than 55 meters (180 feet), use a Category 6A (Cat 6A) or
higher-rated cable.
Input: 100–240 VAC, 50–60 Hz (The plug is localized to the country of sale.)
Output: 12V, 2.5A
Power adapter
From 5.54W to 14.19WPower consumption
10.55 x 8.0 x 3.66 in. (268 x 203 x 93 mm)Dimensions (W x D x H)
3.34 lb (1.515 kg)Weight
32º to 104ºF (0° to 40°C)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
–40° to 158°F (–40º to 70ºC)Storage temperature
95% maximum relative humidity, noncondensingStorage humidity
IEEE 802.3 Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3bz 2.5GBASE-T and 5GBASE-T
IEEE 802.3an 10GBASE-T
IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE standards
User Manual112Factory Default Settings and
Technical Specifications
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX