NETGEAR SRX5308 User Manual

Firewall Protection
121
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 66.
3. Enter the settings as explained in the following table:
Table 24. Add Bandwidth Profile screen settings
Setting Description
Profile Name A descriptive name of the bandwidth profile for identification and management purposes.
Direction From the Direction drop-down list, select the direction in which the bandwidth profile is
applied:
• Outbound Traffic. The bandwidth profile is applied only to outbound traffic. Specify the
outbound minimum and maximum bandwidths.
• Inbound Traffic. The bandwidth profile is applied only to inbound traffic. Specify the
inbound minimum and maximum bandwidths.
• Both. The bandwidth profile is applied both to outbound and inbound traffic. Specify both
the outbound and inbound minimum and maximum bandwidths.
Outbound Minimum
Bandwidth
The outbound minimum allocated bandwidth in Kbps. The default
setting is 0 Kbps.
Outbound Maximum
Bandwidth
The outbound maximum allowed bandwidth in Kbps. The default
setting is 100 Kbps (you cannot configure less than 100 Kbps); the
maximum allowable bandwidth is 100000 Kbps.
Inbound Minimum
Bandwidth
The inbound minimum allocated bandwidth in Kbps. The default
setting is 0 Kbps.
Inbound Maximum
Bandwidth
The inbound maximum allowed bandwidth in Kbps. The default
setting is 100 Kbps (you cannot configure less than 100 Kbps); the
maximum allowable bandwidth is 100000 Kbps.

NETGEAR SRX5308 Specifications

General

Brand	NETGEAR
Model	SRX5308
Category	Firewall
Language	English