Virtual Private Networking Using IPSec Connections
152
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
5. Click Apply to use the new settings immediately, and click Save to keep the settings for
future use.
6. Click the Advanced tab in the Authentication pane. The Advanced pane displays.
Figure 93.
7. Specify the settings that are explained in the following table.
Table 34. VPN client advanced authentication settings
Setting Description
Advanced features
Aggressive Mode Select this check box to enable aggressive mode as the mode of negotiation with
the VPN firewall.
NAT-T Select Automatic from the drop-down list to enable the VPN client and VPN
firewall to negotiate NAT-T.
To Next Page
Loading...
