Virtual Private Networking Using IPSec Connections
157
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Perform one of the following tasks:
- Double-click Gateway-Tunnel.
- Right-click Gateway-Tunnel, and select Open tunnel.
- Click Gateway-Tunnel, and press Ctrl+O.
Figure 97.
• Use the system-tray icon. Right-click the system tray icon, and select Open tunnel
‘Tunnel’.
Figure 98.
Whichever way you choose to open the tunnel, when the tunnel opens successfully, the
Tunnel opened message displays above the system tray:
Figure 99.
Once launched, the VPN client displays an icon in the system tray that indicates whether or
not a tunnel is opened, using a color code:
Figure 100.
Purple icon:
no VPN tunnel opened
Green icon:
at least one VPN tunnel opened
To Next Page
Loading...
