Virtual Private Networking Using SSL Connections
208
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 127.
2. Complete the settings as explained the following table:
Table 52. SSL VPN Client IP Address Range section settings
Setting Description
Client IP Address Range
Enable Full Tunnel Support Select this check box to enable full tunnel support. If you leave this check
box cleared (which is the default setting), split tunnel support is enabled, and
you need to add client routes (see Add Routes for VPN Tunnel Clients on
page 209).
Note: When full tunnel support is enabled, client routes are not operable.
DNS Suffix A DNS suffix to be appended to incomplete DNS search strings. This is
optional.
Primary DNS Server The IP address of the primary DNS server that is assigned to the VPN tunnel
clients. This is optional.
Note: If you do not assign a DNS server, the DNS settings remain
unchanged in the VPN client after a VPN tunnel has been established.
Secondary DNS Server The IP address of the secondary DNS server that is assigned to the VPN
tunnel clients. This is optional.
To Next Page
Loading...
Need help?
General