NETGEAR SRX5308 User Manual

Managing Users, Authentication, and Certificates
228
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
default group; you can delete only the domain with the identical name as the default
group (see Configure Domains on page 221), which causes the default group to be
deleted.
2. Click the Delete table button.
Note: You can delete only groups that you created on the Groups screen.
Groups that were automatically created when you created a domain
cannot be deleted on the Groups screen. See the Important note at
the beginning of this section.
Edit Groups
 To edit a VPN group:
1. Select Users > Groups. The Groups screen displays (see the previous screen).
2. In the Action column of the List of Groups table, click the Edit table button for the group that
you want to edit. The Edit Group screen displays (see the following figure).
With the exception of groups that are associated with domains that use the LDAP
authentication method, you can modify only the idle time-out settings on the Edit Group
screen.
Figure 139.
3. Modify the idle time-out period in minutes in the Idle Timeout field. For a group that is
associated with a domain that uses the LDAP authentication method, configure the LDAP
attributes (in fields 1 through 4) as needed.
4. Click Apply to save your changes. The modified group is displayed in the List of Groups
table.

NETGEAR SRX5308 Specifications

General

Brand	NETGEAR
Model	SRX5308
Category	Firewall
Language	English