Managing Users, Authentication, and Certificates
242
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
c. When prompted for the requested data, copy the data from your saved text file
(including “-----BEGIN CERTIFICATE REQUEST-----” and “-----END CERTIFICATE
REQUEST-----”).
d. Submit the CA form. If no problems ensue, the digital certificate is issued by the CA.
7. Download the digital certificate file from the CA and store it on your computer.
8. Return to the Certificates screen (see Figure 148 on page 240) and locate the Self
Certificate Requests section.
9. Select the check box next to the self-signed certificate request.
10. Click Browse and navigate to the digital certificate file from the CA that you just stored on
your computer.
11. Click the Upload table button. If the verification process on the VPN firewall approves the
digital certificate for validity and purpose, the digital certificate is added to the Active Self
Certificates table.
To delete one or more SCRs:
1. In the Self Certificate Requests table, select the check box to the left of the SCR that
you want to delete, or click the Select All table button to select all SCRs.
2. Click the Delete table button.
View and Manage Self-Signed Certificates
The Active Self Certificates table on the Certificates screen (see Figure 148 on page 240)
shows the digital certificates issued to you by a CA and available for use. For each
self-signed certificate, the table lists the following information:
• Name. The name that you used to identify this digital certificate.
• Subject Name. The name that you used for your company and that other organizations
see as the holder (owner) of the certificate.
• Serial Number. This is a serial number maintained by the CA. It is used to identify the
digital certificate with the CA.
• Issuer Name. The name of the CA that issued the digital certificate.
• Expiry Time. The date on which the digital certificate expires. You should renew the
digital certificate before it expires.
To delete one or more self-signed certificates:
1. In the Active Self Certificates table, select the check box to the left of the self-signed
certificate that you want to delete, or click the Select All table button to select all
self-signed certificates.
2. Click the Delete table button.
To Next Page
Loading...
Need help?
General