Neural DSP Quad Cortex - 4-Row workflow

36
Presets
4-Row workflow
Splitter/Mixer paths can be created between Rows 1 and 2 and
between Rows 3 and 4 exclusively. However, if you need to use all
available rows for a huge chain, check the following example:
3
Row
1
In
3
Row
1
In
Row
Prev
1/2
Out
Row
Prev
1/2
Out
• This giant Preset includes almost all types of device blocks.
• Balance or A/B Splitters work with similar results.
Muting“LEVEL TO A” or turning “Balance” all the way up will
route the signal through the next row.
• In order tochain Rows 2 and 3, tap the output block in Row 2,
and select Row 3 as the output.Row 3 input will be named as
“Prev. Row” automatically.
• The second Splitter/Mixer path worksthe same way as before.
• If you want to make a Preset like this, we recommend
taking a look at theCPU Monitorin order to checkyour CPU
performance.
Check the CPU Monitor section
for more details.