Nice SHEL60KIT

CE DECLARATION OF CONFORMITY
DeclarationinaccordancewithDirectives:1999/5/EC(R&TTE),2004/108/EC(EMC);2006/42/EC(MD)annexII,partB
Note - The content of this declaration corresponds to the declaration made in the ofcial document led in the ofces of Nice S.p.a., and particularly the latest version thereof
available prior to the printing of this manual. The text contained here has been adapted to meet editorial requirements. A copy of the original declaration may be requested from
Nice S.p.a. (TV) I.
Declaration number: 562/SHEL Revision: 0 Language: EN
Name of manufacturer: NICE S.p.A.
Address: ViaPezzaAlta13,RustignèIndustrialZone,31046Oderzo(TV)Italy
Person authorized to provide
technical documentation: NICE S.p.A.
Product type: Electro-mechanical gearmotor and relative accessories
Model / Type: SHEL60, SHEL75
Accessories: Radio controls of the series FLO, FLOR, Smilo
TheundersignedRobertoGriffa,asChiefExecutiveOfcer,herebydeclaresunderhisownresponsibilitythattheproductsidentiedabovecomplywiththe
provisions of the following directives:
• Directive 1999/5/CE OF THE EUROPEAN PARLIAMENT AND COUNCIL dated March 9 1999 regarding radios and communications terminals and recip-
rocal recognition of their conformity in accordance with the following harmonized standards:
- Protectionofhealth(art.3(1)(a)):EN62479:2010
- Electricalsafety(art.3(1)(a)):EN60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013
- Electromagneticcompatibility(art.3(1)(b)):EN301489-1V1.9.2:2011,EN301489-3V1.6.1:2013
- Radiospectrum(art.3(2)):EN300220-2V2.4.1:2012
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15 2004 concerning alignment of Member States’ legislation
regarding electromagnetic compatibility and abrogating directive 89/336/EEC, according to the following harmonized standards:
 EN61000-6-2:2005,EN61000-6-3:2007+A1:2011
The product also complies with the following directive in accordance with the requirements for “quasi-machines”:
•Directive2006/42/ECOFTHEEUROPEANPARLIAMENTANDCOUNCILofMay172006regardingmachinesandamendingdirective95/16/EC(con-
solidated text)
- I declare that the pertinent technical documentation has been prepared in accordance with Annex VII B to Directive 2006/42/EC and that the following essential requirements
have been met: 1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
- The manufacturer agrees to send the national authorities pertinent information on the “quasi-machine” in response to a motivated request without affecting its intellectual
property rights.
-Ifthe“quasi-machine”isoperatedinaEuropeancountrywithanofciallanguageotherthanthelanguageusedinthisdeclaration,theimportermustassociateatranslation
with this declaration.
-The“quasi-machine”mustnotbeoperateduntilthenalmachineinwhichitistobeincorporatedisdeclaredtoconformtotheprovisionsofDirective2006/42/EC,ifapplicable
to it.
Theproductalsocomplieswiththefollowingstandards:EN60335-1:2002+A1:2004+A11:2004+A12:2006+A2:2006+A13:2008+A14:2010+
A15:2011,EN60335-2-103:2003+A11:2009
Thepartsoftheproductwhicharesubjecttothefollowingstandardscomplywiththem:EN13241-1:2003+A1:2011,EN12445:2002,EN12453:2002,
EN12978:2003+A1:2009
Oderzo, 16 March 2016
Ing. Roberto Griffa (Chief Executive Ofcer)
PRODUCT DISPOSAL
This product is an integral part of the automation and therefore must
be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly and
scrappingoperationsmustbeperformedbyqualiedpersonnel.
This product comprises various types of materials: some may be recycled oth-
ers must be disposed of. Seek information on the recycling and disposal sys-
tems envisaged by the local regulations in your area for this product category.
Caution! – some parts of the product may contain pollutant or hazardous sub-
stances which, if disposed of into the environment, may cause serious damage
to the environment or physical health.
As indicated by the symbol alongside, disposal of this prod-
uct in domestic waste is strictly prohibited. Separate the
waste into categories for disposal, according to the meth-
ods envisaged by current legislation in your area, or return
the product to the retailer when purchasing a new version.
Caution! –Locallegislationmayenvisageseriousnesin
the event of abusive disposal of this product.
usedandthedeclarationofconformitycompiledbytheinstaller(seesection
TECHNICAL DOCUMENTATION).
2 Afxadataplateonthedoor,specifyingatleastthefollowingdata:typeof
automation,nameandaddressofmanufacturer(responsibleforcommis-
sioning), serial number, year of construction and CE mark.
3 Prepare and provide the owner with the declaration of conformity; the “CE
Declaration of conformity” in the section TECHNICAL DOCUMENTATION
must be compiled for this purpose.
4 Prepare and provide the owner with the form “Operation manual” in the
section TECHNICAL DOCUMENTATION .
5 Prepare and provide the owner with the form “Maintenance schedule”
in the section TECHNICAL DOCUMENTATION, containing all maintenance
instructions for all devices in the automation .
6 Before commissioning the automation, ensure that the owner is adequately
informed of all associated risks and hazards.
7 Permanentlyafxalabelorplateonthedoorwiththeimageshowning. 46
(minimumheight60mm)bearingthetext“CAUTION:RISKOFCRUSHING”.
PERIODIC MAINTENANCE OPERATIONS
In general, this product does not require special maintenance; however, regular
checksovertimewillensuresystemefciencyandcorrectoperationofthe
safety systems installed.
Therefore to ensure correct maintenance, refer to the chapter “Maintenance
Schedule” in the section “TECHNICAL DOCUMENTATION” at the end of the
manual.
English – 9
EN