149
Z
3 Frame a photograph, focus, and
shoot.
The camera will vary exposure and/or flash level shot-by-shot
according to the bracketing program selected.
Modifications
to exposure are added to those made with exposure
compensation (see page 143).
While bracketing is in effect, a bracketing progress indicator
will be displayed in the viewfinder and top control panel.
A
segment will disappear from the indicator after each shot.
❚❚ Canceling Bracketing
To cancel bracketing, press the BKT button and rotate the main
command dial until the number of shots in the bracketing
sequence is zero (r) and M is no longer displayed.
The program
last in effect will be restored the next time bracketing is activated.
Bracketing can also be cancelled by performing a two-button reset
(0 224), although in this case the bracketing program will not be
restored the next time bracketing is activated.
No. shots: 3; increment: 0.7 Display after first shot
A See Also
For information on choosing the size of the exposure increment, see
Custom Setting b2 (EV steps for exposure cntrl, 0 331).
For
information on choosing the order in which bracketing is performed,
see Custom Setting e7 (Bracketing order, 0 343).
For information on
choosing the role of the BKT button, see Custom Setting f1 (Custom
control assignment) > BKT button + y (0 344, 351).
To Next Page
Loading...
