163
r
3 Press J.
Press J to save settings and return to
the photo shooting menu.
If white
balance has been fine-tuned, an asterisk
(“U”) will be displayed in the rear control
panel.
❚❚ The U Button
At settings other than K (Choose color temp.) and L (Preset
manual), the U button can be used to fine-tune white balance
on the amber (A)–blue (B) axis (0 162; to fine-tune white balance
when L is selected, use the photo shooting menu as described
on page 178).
Press the U button and rotate the sub-command
dial to fine-tune white balance in steps of 0.5 (with each full
increment equivalent to about 5 mired) until the desired value is
displayed in the rear control panel.
Rotating the sub-command
dial to the left increases the amount of amber (A).
Rotating the
sub-command dial to the right increases the amount of blue (B).
At settings other than 0, an asterisk (“U”) appears in the rear
control panel.
U button Sub-command dial Rear control panel
To Next Page
Loading...
