Nikon D5 - Page 195

171
r
6 Check the results.
If the camera was able to measure a
value for white balance, C will flash
in the control panels, while the
viewfinder will show a flashing a.
Press the shutter-release button
halfway to exit to shooting mode.
If lighting is too dark or too bright, the
camera may be unable to measure
white balance.
A flashing ba will
appear in the control panels and
viewfinder.
Press the shutter-release
button halfway to return to Step 5 and
measure white balance again.
Top control panel
Rear control panel
Viewfinder
Top control panel
Rear control panel
Viewfinder