To cancel Dial Block:
<KTS>
1. Press SPK key.
2. Press ICM key (824/1232/2464 only) (See note 1)
3. Dial , # (824/1232/2464)
Dial 95 (308)
4. Dial 4-digit code which is entered when setting Dial Block
5. Dial #
− Confirmation tone when effective
− Error tone when not effective
<SLT>
1. Lift handset
2. Dial function code (See note 2)
3. Dial 4-digit personal code which is entered when setting Dial Block
4. Replace handset.
Note 1: If program #75-D is 0 (Not tone), skip Step 2 (824/1323/2464).
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 66
Dial Plan 2 0 0 956
1 9 056
Related System Data:
35-C: Toll Restriction Class (Dial Block)
Flash
Description:
The flashing time can be set by system program (#26) to two different timings for CO
lines and PBX lines. To send a flashing signal, just depress the FLASH key after seizing a
CO/PBX line.
Station Application:
KTS, SLT
Operation:
<KTS>
1. On the CO/PBX line.
2. Press FLASH key.
To Next Page
Loading...