Nitsuko TX Series - Conference; Add-On Conference

To answer a call on Hold (the call placed on System Hold or Exclusive Hold by the
extension user itself) in case the line which does not appear under Line key is held.
1. Lift handset.
2. Press ICM key (824/1232/2464 only) (See note).
3. Press OPAC key.
4. Dial 3.
Note: If program #75-D is 0 (No Tone), skip step 2 (824/1232/2464).
Related System Data:
#08-E: Park Hold Group
#55: Park Hold Key Assignment
 Conference


 Add-On Conference
Description:
Add-On Conference lets an extension user establish an outside call and then add up to
five other inside parties to the conversation. If Multi-Line Conference is enabled in
programming, a second outside call can be added to the conversation.
Station Application:
KTS, SLT
Operation:
<Method 1>
To establish an outside call:
<KTS>
1. Establish an outside call.
2. Press CONF key.
3. Press ICM key.
4. Dial extension number of invited party. This party must answer using the handset.
5. Press CONF key. Conference established. To add more inside parties, repeat steps 2-5.
<SLT>
1. Establish an outside call.
2. Flash Hook-switch.
3. Dial 93.
4. Dial extension number of invited inside party.
5. Flash Hook-switch.
Conference established. To add more inside parties, repeat step 2-5.