To display the extension number that left a Message Waiting:
<KTS with LCD>
− Do not lift handset.
1. Press CHECK key.
2. Dial. Extension number is displayed.
3. Press Hold key to clear the Message Waiting Indication.
4. Press ICM key to call back Message Waiting originating extension.
5. To display the next extension that left a Message Waiting indication, dial again.
6. Press CLEAR to return to normal display.
Related System Data:
#80-01-A: Message Waiting
Paging
Description:
Internal Paging lets an extension user make a paged announcement over the speaker of
the other telephones in the system. Any extension can make a page, but only key telephone that
are assigned to Internal Page Zone can receive a page. There are four types of Internal Paging:
− Internal Zone Paging lets an extension user page all telephones assigned to a
particular Internal Page Zone.
− All Call Paging lets an extension user page all Internal Page Zone.
− Meet-Me Answer/Conference Paging allows an extension user to page one or more
persons, then reserve an Intercom circuit for 30 seconds so that the paged
party/parties can reply. Meet-Me Answer lets one party reply, while Meet-Me
Conference lets up to five people reply and jointly converse.
The system has four zones, numbered 1-4. The system can be programmed to broadcast All
Call Paging over external speakers.
External Zone Paging allows customer-provided paging equipment (speakers, amplifiers, etc.)
to be installed in large, noisy areas (zones) so that extension users can make paged
announcements to these zones. In the system, two external zones are available.
Station Application:
KTS, SLT
To Next Page
Loading...