To use automatic Intercom Off-Hook Signalling:
<KTS/SLT>
1. Place Intercom call. When the called extension is busy, one short burst of tones is heard
instead of busy tone.
2. Wait for a reply. To manually send more tones, dial 1.
To answer an Intercom Off-Hook Signalling:
<KTS>
1. Press flashing ICM. This answers the waiting call and puts an outside call in progress on
Hold. This step will, however, terminate in Intercom call in progress; Intercom calls
cannot be put on Hold.
<SLT>
1. Flash Hook-switch (On-Hook Off-Hook). This answers the waiting call and
terminates an Intercom call in progress.
Related System Data:
#04-C: Intercom Off-Hook Signalling
Group Hunt
Description:
Group Hunt searches for an idle extension among all the extensions in a particular
Hunting Group. Extensions are assigned to Hunting Groups in programming – for example, all
the extensions in a sales department might be assigned to Hunting Group 4. when an extension
user dial a Hunting Group number, the Group Hunt feature automatically calls the first idle one
it finds. When all extensions in a Hunting Group are busy, a user receives busy tone and can
activate Call-back or Camp-On. These features automatically connect the user to the first
extension programmed into that group as soon as it becomes available. When the called
extension does not answer in the pre-programmed time, the system automatically calls the next
idle extension in the same Hunting Group according to the order in the Hunting Group. The
caller can also call the next idle extension by manual operation. The extension to be searched
first in the Hunting Group can be fixed or circulated (Program #80-2A). When all extensions in
the same Hunting Group are searched and no extension answers. Group Hunt is cancelled.
Station Application:
KTS, SLT
To Next Page
Loading...