Nitsuko TX Series - Call Pickup

To answer a voice announced call using Handsfree Answerback:
<KTS only>
1. Speak toward the phone. The microphone must be on.
Related System Data:
Not applicable
 Call Pickup
Description:
Call Pickup provides two distinct functions: one function applies to intercom calls and
the other to outside calls.
− Call Pickup allows the extension users to answer intercom call and Doorphone call.
An intercom call that is ringing (or voice-announced) at a particular extension can be
answered from any other extension in the system.
− Call Pickup also allows the extension users to answer a Trunk incoming call,
incoming call on a DISA line, and announced Transfer.
In order to pick up someone else’s intercom call, an extension user must know the number of
the extension that is ringing. If the ringing and answering extensions are in the same Internal
Page Zone (Program #08-C), the # key can be used to pick up the internal call.
Station Application:
KTS, SLT
Operation:
To use Call Pickup to answer an intercom call, incoming call on a DISA line
Unannounced Transfer, and Trunk incoming call on a extension in own pick-up group:
<KTS>
1. Lift handset or press SPK key.
2. Press ICM key (TX-Z 824/1232/2464 only) (See note 1).
3. Dial #. If more than one extension is ringing, this code answers intercom call,
unannounced transfer, incoming call on a DISA line, and trunk incoming call.
<SLT on Dial Plan 1/2>
1. Lift handset.
2. Dial #.
<SLT on Dial Plan 1 only>
1. Lift handset.
2. Dial 8.