Hold
System Hold
Description:
System Hold puts an outside call on Hold so that it can be picked up from any extension
in the system. If the System Hold Recall program is enabled, a call left on System Hold longer
than a programmed period of time re-rings the extension that placed it on Hold.
Station Application:
KTS, SLT
Operation:
To put a call on System Hold:
<KTS>
1. Press HOLD key.
2. Hang up. Line key flashes at this KTS and slowly at the other KTS in the system.
<SLT>
1. Flash Hook-switch.
2. Dial 91.
3. Hang up.
To retrieve a call on System Hold:
<KTS>
1. Lift handset.
2. Press flashing Line key.
<SLT>
1. Lift handset.
2. Dial function code (See note).
Note:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 69
Dial Plan 2 0 0 959
1 9 059
Related System Data:
#16-B: Recall Trunk Off-Hook Access
#22: System Hold Recall
To Next Page
Loading...