Operation:
To use Camp-On:
<KTS>
1. Lift handset
2. Press ICM key (824/1232/2464 only) (Se note)
3. Press HOLD key.
4. Dial Queuing Group number (0-6) (0: Same Group, 1-6: Group No.)
− If you hear busy tone, the extension can not use Camp-On for that group
5. Replace handset
<SLT>
1. Place an outside call. Hear busy tone
2. Dial Queuing Group number (0-6) (0: Same group, 1-6: Group No.)
3. Replace handset
Note: If program #75-D is 0 (No tone), skip step 2 (824/1232/2464)
When Camp-On rings an extension:
<KTS>
1. Lift handset
2. Press the flashing Line key.
<SLT>
1. Lift handset.
Related System Data:
#01-C: Queuing Group – Line Assignment
#16-B: Recall Trunk Off-Hook Access
Key Touch Tone
Description:
The Key Touch Tone feature allows a toe to be emitted from the built-in speaker each
time a Line, One-Touch or dial pad key is pressed. The tone confirms the key was fully
pressed.
Station Application:
KTS
Operation:
To activate Key Touch Tone:
− Don not lift handset
1. Dial
To Next Page
Loading...