Nitsuko TX Series - Private Line

Station Application:
KTS, SLT
Operation:
Not applicable.
Related System Data:
#01-B: Dial Mode
#17-A: Dial Pulse Sender Speed
#17-B: Make/Break Ratio
#17-C: DTMF Minimum Pause Time
 Private Line
Description:
The Private Line feature allows an incoming and/or outgoing outside line to be assigned
to only one extension for exclusive use by that extension. Any outside line can be designated as
a Private Line. All features involving outside lines apply to Private Lines as well – for example,
calls placed and answered on a Private Line as they are on any other line.
1) Private Line is assigned to an extension as follows:
− A line group must be formed that contains only the Private Line. For example, if
line 3 is to be used as a Private Line, line group XX must have the following
entry in Program #02: 02-XX-03-03(i.e., line 03 is the lowest and highest
numbered line in the group).
− The line group must be assigned to only one extension in Program #06 and/or
Program #07 for outgoing and/or incoming access, respectively.
2) An extension programmed for the Break-In feature can break into a call on a Private
Line.
Station Application:
KTS, SLT
Operation:
Not applicable.
Related System Data:
#02: Line Group
#06: Outgoing Trunk Access
#07: Incoming Trunk Access/Audible