Station Application:
KTS, SLT
Operation:
To access the first available line in a Queuing Group:
<KST>
1. press SPK key
2. Press ICM key (824/1232/2464) (See note)
Dial 91 (308)
3. Dial Queuing Group number (1-6). A line is seized and dial tone comes over the
speaker.
<SLT on Dial Plane 1)
1. Lift handset
2. Dial Queuing Group number (1-4)
<SLT on Dial Plan 2>
1. Lift handset
2. Dial 06 or 96 (Refer to #20-D)
3. Dial Queuing Group number (1-6)
Note: If program #75-D is 0 (No Tone), skip step 2 (824/1232/2464)
Related System Data:
#01-C: Queuing Group – Line Assignment
#15-C: Automatic Trunk Access
#20-D: Automatic Trunk Access Code for SLT
#64-C: Trunk Line Seizing Order Selection
Automatic Repeat Dialling
Description:
If an extension user places a trunk call that is busy or unanswered, they can have
Automatic Repeat Dialling try again later on. The user doesn’t continually have to try the
number again – hoping it will go through. Automatic Repeat Dialling automatically retries it
until the called party answers. Moreover, while Automatic Repeat Dialling is set (waiting, busy
or no-answer). Hurry-Up operation can be taken place for immediate redial.
While Automatic Repeat Dialling is set (waiting condition), 2-Splash tone (Mute-tone) is
emitted from built-in Speaker in 5 second cycle.
To Next Page
Loading...