î Incoming Trunk Access
Description:
Trunk lines can be grouped into a maximum of 30 groups. The line groups assigned to
each extension can access for incoming calls and the audible assignments (day and/or night
mode ringing) for the extensions. Up to two incoming line groups can be assigned to an
extension. An extension user can answer an incoming call on a particular line group only if the
extension has Incoming Trunk Access to that group. When an extension is assigned incoming
access to a line group, the lines in the group appear under the Line Keys (KTS).
Station Application:
KTS, SLT
Operation:
<KTS>
To answer an outside call by Direct Pickup:
1. Lift handset or press SPK key.
2. Press flashing Line key.
To answer an outside call by Dial Pickup:
1. Lift handset or press SPK key (See note).
2. Dial 96 (824/1232/2464).
Dial 92 (308).
Note: If program #75-D is 0 (No Tone), press ICM after Step 1 to seize Intercom
(824/1232/2464).
<SLT>
1. Lift handset.
2. Dial 06 (or 96) => Check your dial plan.
Related System Data:
#02: Line Group Assignment
#03-C: Common Use Line Assignment
#07: Incoming Trunk Access/Audible
#16-A: Ringing Trunk Off-Hook Access
To Next Page
Loading...