<SLT>
1. Lift handset.
2. Dial function code (See Note)
Note:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 69
Dial Plan 2 0 0 959
1 9 059
B. To activate DND while on a call:
<KTS>
1. For level 1: Press OPAC, DND once. DND flashes.
For level 2: Press OPAC, DND once. DND lights steadily.
For level 3: Press OPAC, DND once to block Trunk call ringing and intercom calls.
Or
Press OPAC, DND twice to block just Trunk call ringing. DND flashes.
To cancel DND while on a call:
<KTS>
1. Press OPAC, DND once or twice.
− Whichever makes DND extinguish.
Related System Data:
#13-B: Do Not Disturb
Intercom Hold
Description:
It is possible to place an intercom call on hold. While on hold, music is sent to the held
party. Unlike Trunk line hold, when an ICM call is held, no other action can be taken by the
holding party. Only the hold-originating station can re-answer this line by pressing the ICM
key.
Station Application:
KTS
Operation:
To put an intercom call on hold:
1. Press Hold (See Note).
Note: Do not hang up while an intercom call is on Hold. If you hang up the handset, your
intercom call is terminated.
To Next Page
Loading...