EasyManua.ls Logo

Nitsuko TX Series - Long Conversation Warning; Long Conversation Cut-Off

Default Icon
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: If Manual Mode (Program #80-01-D = 0) is assigned, Conference initiator must
flash Hook-switch after the called party answers to established an internal conference.
To join an Internal Conference when invited:
<KST/SLT>
1. Lift handset and wait.
Related System Data:
#80-01-D: Internal Conference Mode
Long Conversation Warning (Three Minutes)
Description:
Long Conversation Warning is a signal reminder that sounds every three minutes while
an extension is on an outgoing call. The signal reminder is a series of three short tones that
sound over the speaker of the phone.
Station Application:
KTS
Operation:
Not applicable
Related System Data:
#18-A: Three Minutes Warning Tone
Long Conversation Cut-Off
Description:
A conversation on an external call (only Outgoing Call) can be forcibly terminated by
the system after a pre-programmed period has lapsed. Before terminating the call, a warning
tone will be sent to the caller within a pre-programmed period. Theis feature is enabled or
disabled on an extension basis.
This feature permits the restriction of long conversations on certain extensions.
Station Application:
KTS, SLT
Operation:
Not applicable

Table of Contents

Related product manuals