Nitsuko TX Series - Transfer; Unannounced Transfer

Station Application:
KTS, SLT
Operation:
Not applicable
Related System Data:
#56: Relay Contact Assignment
 Transfer
Description:
Unannounced Transfer lets an extension user transfer (send) a call directly to another
extension- that is, without first notifying the receiving extension of the call. An Unannounced
Transfer rings the receiving extension. If the receiving extension does not answer within the
Unannounced Transfer Recall interval, the call recalls (re-rings) the transferring extension.
Station Application:
KTS, SLT
Operation:
To make an Unannounced Transfer:
<KTS>
1. Press ICM key, then dial extension number.
2. Press TRFR key or hang up. (According to #80-01-E).
<SLT>
1. Flash Hook-switch.
2. Dial extension number.
3. Hang up.
To receive an Unannounced Transfer:
<KTS>
1. Lift handset. If Recall Trunk Off-Hook access is programmed, this single step answers
the call.
2. Press the flashing Line key (Key flashes green).
<SLT>
1. Lift handset.
Related System Data:
#16-B: Recall Trunk Off-Hook Access
#23: Unannounced Transfer Recall
#80-01-E: On-Hook Transfer