Note 1: “Conversation Timer” (#82-1) will be activated even if the assigned extension places an
outgoing call then transfers that Trunk line to another extension. (Conversation Timer will also be
activated even if transferred extension is set to 0 by Program #75-E).
Note 2: In the event of Multi-Line Conference being established by the assigned extension, only
outgoing Trunk line will be forcibly terminated after the pre-programmed period has lapsed. The
conversation between Incoming Trunk line and the assigned extension will be maintained.
Related System Data:
#75-E: Long Conversation Cut-Off
#82: Long Conversation Cut-Off Timer
Break-In
Description:
Break-In lets an extension user override the system’s privacy feature – a key telephone
user can break into an outside call at another extension, including a call on a Private Line. The
intrusion may or may not be preceded by a warning tone, depending on programming (Program
#-04-A), and the warning tone comes over the speaker of both extensions. A warning intrusion
tone can be sent in every 2 seconds by programming (Program #78-C).
Station Application:
KTS
Operation:
1. Lift handset or press SPK key.
2. Press steadily lit line key. This breaks into the telephone conversation on that line.
Other System Data:
#04-A: Break-In
#78-C: Break-In Warning Tone
To Next Page
Loading...