Note 1: If program #75-D is 0 (No Tone), skip step 2 (824/1232/2464).
Note 2: You can enter pauses (TRFR key), flashes (FLASH key) and stops (CONF key) when
storing a Abbreviated Dial Number. Each pause, stop or flash counts as a digit when totalling the
number of digits in a Abbreviated Dial Number. When stop is inserted, dialling will be stopped this
position and can be continued by dialling.
Related System Data:
#08-B: SLT Dial Plan Set
#17-D: Storage Quantity of Abbreviated Dial
#18-C: Abbreviated Dialling Restriction
î One-Touch Dialling
Description:
One-Touch Dialling allows you to store ten of your most frequently called outside
numbers as personal abbreviated dial numbers at your extension so you can call them with just
a single touch. Dial number to be stored is up to 18 digits including pauses (TRFR key), flashes
(FLASH key) and stops (CONF key). The One-Touch Dial numbers are stored under the ten
One-Touch keys (No.1 to No.10) as F01 to F10.
When the number of common Abbreviated Dialling is set to 100 in Program #17-D, the
memory for the remaining 100 numbers can be used for personal abbreviated dial numbers at
10 key telephones. The assigned Key Telephone user can store up to 10 more numbers under
ten One-Touch keys as F11 to F20. When dialling, the user must press OPAC key before
pressing an One-Touch key.
Station Application:
KTS
Operation:
<ALL KTS>
To place an outside call:
1. Seize a Trunk line.
2. Press On e Touch key which stores desired phone number.
To Next Page
Loading...