Nitsuko TX Series - Page 8

To store a One Touch Dial number:
1. Press SPK key.
2. Press ICM key (824/1232/2464 only) (See note 1).
3. Press DC key and 
4. Press a One-Touch key to store a phone number.
5. Dial phone number to stored (One-Touch Key No.1 to No.10 store numbers in F01-
F10).
6. Repeat steps 3 to 5.
7. Press SPK key to exit from One-Touch Dialling entry.
<Only assigned KTS>
To place an outside call:
1. Seize a Trunk line.
2. Press OPAC key.
3. Press One-Touch key which stores the desired phone number.
To store a One-Touch Dial number:
1. Press SPK key.
2. Press ICM key (824/1232/2464 only) (See note 1).
3. Press OPAC key.
4. Press DC key and 
5. Press a One-Touch key to store a phone number. (One-Touch Key No.1 to No.10 store
numbers in F11-F20).
6. Dial phone number to be stored.
7. Go to Step 3 to enter another number.
OR
Hang up or press SPK to finish.
To check stored One-Touch Dial number:
(On-hook condition)
1. Press CHECH key.
2. Press SPK key.
3. Press DC key and OPAC key.
4. Press a One-Touch key which stores the phone number.
5. Press CLEAR key to finish.
Note 1: If program #75-D is 0 (No Tone), skip step 2 (824/1232/2464).
Note 2: If the above operations are taken without pressing OPAC key, the numbers stores in F1-
F10 are called.
Related System Data:
#17-D: Storage Quantity of Abbreviated Dialling.
#75-B: Personal Abbreviated Dial.