To initiate Meet-Me Conference:
<KTS>
1. Seize ICM.
2. Dial code 81-84 for zones 1-4; 80 for All Call.
3. Page person, announce that pressing CONF key will join Meet-Me Conference.
4. Press CONF key for Meet-Me Conference.
5. Do not hang up. Wait for a reply.
To reply to Meet-Me Conference:
<KTS>
1. Lift handset or press SPK at a phone that received the page.
2. Press ICM key TX-Z 824/1232/2464 only) (See note).
3. Press CONF key for Meet-Me Conference.
Note: If Program #75-D is 0 (No Tone) skip step 2 (TX-Z 824/1232/2464).
Related System Data:
#08-C: Internal Page Zone
#19-A: All Call to External Zone
#20-B: Paging Splash Tone
î Flexible Station Numbering
Description:
Flexible Station Numbering allows any extension number, within a specific range, to be
assigned to each telephone port in the system. Originally, extension numbers match telephone
port numbers. Refer to the chart below for the range of extension number available to the
telephone ports. Three-digit extension numbers are available only for TX-Z 824/1232/2464.
System Port Available Extension
Numbers (2 Digit)
Available Extension
Numbers (3 Digit)
10-33
10-79 100-799
Station Application:
KTS, SLT
Operation:
Not applicable
Related System Data:
#14: Station Numbering
To Next Page
Loading...