<SLT>
1. Lift handset.
2. Dial 7, wait for dial tone (See note).
3. Dial code.
− 80 for All Call.
− 81-84 for zones 1-4.
− 85 for all external zones.
− 86 for external zone 1 (TX-Z 824/1232/2464 only).
− 87 for external zone 2 (TX-Z 824/1232/2464 only).
4. Page person, announce code.
− 80-87: TX-Z 824/1232/2464.
− 80-85: TX-Z 308.
5. Dial # for Meet-Me Answer.
6. Do not hang up. Wait for reply.
Note: If SLT set on Dial Plan 2, skip step 2.
To reply to Meet-Me Answer:
<KTS>
1. Lift handset or press SPK at a phone that received the page.
2. Press ICM key (TX-Z 827/1232/2464 only) (See note 1).
3. Dial announced code.
− 80-87, or 88 (same zone): TX-Z 824/1232/2464
− 930-935, or 938 (same zone): TX-Z 308.
<SLT>
1. Lift handset at a phone that receives the page.
2. Dial function code (See note 2).
3. Dial announced code.
− 80-87, or 88 (same zone): TX-Z 824/1232/2464
− 80-85, or 88 (same zone): TX-Z 308.
Note 1: If Program #75-D is 0 (No Tone) skip step 2 (TX-Z 824/1232/2464).
Note 2:
Program #20-D Data Automatic Trunk Code for SLT Dial at Step 2
0 0 98
1 9 08
To Next Page
Loading...