Nitsuko TX Series - One-Touch Feature Access

Operation:
To set the External Call Forward Mode (#10 KTS only):
1. Press SPK.
2. Press ICM key (TX-Z 824/1232/2464 only) (See Note).
3. Press OPAC, dial 70.
4. Press SPK.
To cancel the External Call Forward Mode (#10 KTS only):
1. Press SPK.
2. Press ICM key (TX-Z 824/1232/2464 only) (See Note).
3. Press OPAC, dial 70.
4. Press SPK.
Note: If Program #75-D is 0 (No Tone), skip step 2 (TX-Z 824/1232/2464).
Refer to DISA (Extension Access) and DISA (Trunk-To-Trunk).
Related System Data:
#03-A: DISA Line
#03-B: DISA Line Access
#08-A: Instrument Type
#31: Trunk-To-Trunk Cut-Off Timer Assignment
 One-Touch Feature Access
Description:
This feature permits to store the features under the One-Touch, Line or DLS keys so
they can be used to access the following features instead of dialling/pressing function code in [
]. See descriptions and operations of each feature for detailed procedure. Loop Key (No.14)
can be assigned only to Line key which is not defined.
01: Alarm [OPAC-50]
02: Timer [OPAC-51]
03: Day/Night Mode [SPK-ICM (TX-Z 824/1232/2464 only)-TRFR-#] (See Note)
04: Monitor [OPAC-FLASH]
05: Monitored [SPK-ICM (TX-Z 824/1232/2464 Only)-OPAC-FLASH] (See
Note)
06: Recall Trunk Display: [SPK-ICM (TX-Z 824/1232/2464 only)-OPAC-CHECK] (See
Note)
07: Repeat Dial key: [OPAC-1]
08: Repeat Dialling (Hurry Up) [OPAC-2]
09: Directory Dialling (Line): [DC-6]
10: Directory Dialling (ICM): [DC-4]
11: I-Hold Release [SPK-ICM (TX-Z 824/1232/2464 only)-OPAC-3] (See Note)
12: Restriction Release [OPAC-DC]