Tenant Service
Description:
Tenant Service allows two or more independent businesses to share the system. Each
tenant can be assigned incoming and/or outgoing outside lines dedicated for its own use. Some
features (Extension calls, Paging calls, Abbreviated Dialling, Attendant Reverting) can be
partitioned among the tenants. Night Transfer can be independently used by each tenant if a “1”
is entered in program #15-B.
Station Application:
KTS, SLT
Operation:
Not applicable.
Related System Data:
#02: Line Group Assignment
#06: Outgoing Trunk Access
#07: Incoming Trunk Access/Audible
#08-D: Tenant Group
#15-B: Night Service
#52: Tenant Feature
#53: Tenant Abbreviated Dial
#54: Tenant Attendant
Unsupervised Conference
Description:
Unsupervised Conference allows an extension user to establish a Conference with two
outside parties, then hang up, leaving the outside parties connected. The extension user can
later join the Unsupervised Conference if desired. The system can accommodate up to four
Unsupervised Conference at a time, and each Unsupervised Conference must be assigned an
unused extension port in Unsupervised Conference Port Assignment (Program #05). And
Multi-Line Conference must be enabled in programming.
Station Application:
KTS
To Next Page
Loading...