− Conference standby: 0.1 sec On/ 0.1 sec Off/ 0.1 sec On/ 0.7 sec Off (BLF: Green)
− Idle: Extinguish
− All line are Busy: Light (BLF: Red)
Station Application:
KTS
Operation:
To seize a Trunk line:
1. Press Loop Key (Dial Tone is heard)
* Refer to One-Touch Feature Access for how to assign Loop Key.
To answer the incoming call:
(This feature is available for KTS which is allowed Ringing Trunk Off-Hook Access Feature)
1. Incoming call to a Trunk line (Ringing)
2. Lift handset (Loop key lights Green)
Related System Data:
#64-C: Trunk Line Seizing Order Selection
Automatic Off-Hook Truck Access
Description:
The assigned extension users can seize an idle Trunk Line by only lifting the handset.
The operations such as pressing Line key or dialling Trunk Access Code become unnecessary.
This feature is useful for Key Telephone users who mainly makes outside calls or to connect
Fax Machines (Modems) instead of Single Line Telephones.
Station Application:
KTS, SLT
Operation:
<KTS>
1. Lift Handset or press SPK key (An idle Trunk Line will automatically be seized)
Note 1: If all Trunk Lines are busy, no tine will be heard.
Note 2: This disables the user to seize Intercom after lifting handset. Press ICM key before
lifting handset to seize Intercom.
Note 3: Lifting the handset when the extension is ringing answers Trunk Line or Intercom call.
<SLT>
1. Lift handset (An idle Trunk Line will automatically be seized)
Note 1: If all Trunk Lines are busy, Busy Tone will be heard.
To Next Page
Loading...