Nitsuko TX Series - Easy Trunk Access; Queuing Group Access

To cancel Key Touch Tone:
− Do not lift handset
1. Dial . Final Key Touch Tone is heard.
Related System Data:
#13-A: Key Touch Tone
 Easy Trunk Access
Description:
Easy Trunk Access lets an extension user access an outgoing line without pressing Line
key or dialling a two-digit number. A single-digit code automatically accesses an outgoing
outside line from smaller number, large number, or rotated number
Station Application:
KTS, SLT
Operation:
To access the first available outgoing line:
<KTS>
1. (On-Hook and Speaker off condition)
2. Dial 0. a line is seized and dial tone comes over the speaker
<SLT>
1. Lift handset
2. Dial 9 or 0 (Refer to Program #20-D)
Related System Data:
#15-C: Automatic Trunk Access
#20-D: Automatic Trunk Access Code for SLT
#64-C: Trunk Line Seizing Order Selection
 Queuing Group Access
Description:
Queuing Group Access lets an extension user access the first available outgoing line in a
Queuing Group without pressing a Line key or dialling a two-digit line number. A single-digit
code automatically accesses an outgoing line from small number, large number, or rotated
number.