Operation:
To establish an Unsupervised Conference:
1. Establish first outside call.
2. Press CONF key. The call is put on Hold.
3. Establish second outside call.
4. Press CONF key.
− Three-party Conference is established.
5. Press CONF key.
− Both outside parties are put on hold.
6. Hang up.
− Unsupervised Conference is established.
To later join an Unsupervised Conference:
1. Lift handset.
2. Press either Line key of the Conference.
To terminate:
1. Established Three-party Conference.
2. Hang up.
− Both outside lines become idle.
Note: When both outside parties finish the call, unsupervised conference must be
manually terminated by the telephone which sets up the call.
Related System Data:
#05: Unsupervised Conference Port Assignment
#16-E: Multi-Line Conference
Call Timer
Description:
Call Timer is an automatic stopwatch features that timer outgoing outside calls on
Display phones. The display changes to a stopwatch at the programmed Call Duration Start
Time and the timing stops when the extension user hangs up. The display shows the duration of
the call for approximately eight seconds, then changes to the date and time.
Station Application:
KTS with LCD’
Operation:
Not applicable.
Related System Data:
#25: Call Duration Start Time
To Next Page
Loading...