Automatic Hold
Description:
Automatic hold lets the KTS put an outside call on System Hold quickly without
pressing the HOLD key in order to place an internal call. If necessary, holding operation can be
ignored within the assigned timer by programming after placing an outside call. In that case,
assigned extension(s) can still hold calls in spite of the setting in #87.
Station Application:
KTS
Operation:
To put an outside call on System Hold using Automatic Hold:
1. Press the ICM key to place an extension call. The call in progress is automatically put on
Hold.
Related System Data:
#77: Extension Assignment 6
#87: Hold Disable Timer
Exclusive Hold
Description:
Exclusive Hold puts an outside call on Hold at an extension so that it can only picked up
from that extension. If not picked up within a programmed interval of time, a call on Exclusive
Hold recall (re-rings) the extension that placed it on Hold. On KTS, if the recall is not
answered, the call reverts to System Hold and can be picked up from ant extension. On SLT, if
the recall is not answered, the call reverts to extension No.10 (for attendant extension of each
tenant), or cut-off.
Station Application:
KTS, SLT
Operation:
To put an outside call on Exclusive Hold:
<KTS>
1. Press HOLD key twice.
2. Hang up. Line key flashes fast. At all other KTS, the Line key is steadily lit (busy).
<SLT>
1. Flash Hook-switch.
2. Dial 92.
3. Hang up.
To Next Page
Loading...