To cancel all Message Waiting indications:
<KTS>
1. Lift handset.
2. Press ICM key (TX-Z824/1232/2464 only) (See note 1).
3. Dial, 0, (TX-Z 824/1232/2464).
Dial 94, 0, (TX-Z 308).
4. Hang up.
<SLT>
1. Lift handset.
2. Dial function code (See note 3).
Note 1: If Program #75-D is 0 (No Tone), skip step 2 (TX-Z 824/1232/2464).
Note 2: When SLT is set this feature, the SLT’s dial tone changes from continual tone to 0.4 sec.
on/0.1 sec. off.
Note 3:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 69
Dial Plan 2 0 0 959
1 9 059
To cancel an individual Message Waiting:
<KTS only>
1. Lift handset.
2. Press ICM key (TX-Z 824/1232/2464 only) (See Note 1).
3. Dial, destination number, (TX-Z 824/1232/2464).
Dial 94, destination extension number, (TX-Z 308).
4. Hang up.
<KTS with LCD only>
− Do not lift handset –
1. Press OPAC key.
2. Press CLEAR key (See note 2).
Note 1: If Program #75-D is (No Tone) skip step 2 (TX-Z 824/1232/2464).
Note 2: This operation can be available at extension which MW is set. The extension has to be
only KTS with LCD.
To Next Page
Loading...