<KTS/SLT>
To join an Add-On Conference when invited:
1. Lift handset.
<Method 2>
To establish an Add-On Conference:
<KTS Only>
1. Establish outside call.
2. Press CONF key.
3. Press ICM key and call the other telephones by paging and tell the Line key number.
The called parties must press the Line key to join.
4. Press CONF key.
To join an Add-On Conference when invited:
1. Lift handset.
2. Press Line key.
Related System Data:
#16-D: Add-On Conference Set up Mode.
Multi-Line Conference
Description:
Multi-Line Conference allows an extension user to establish an outside call and then add
another outside party to the conversation.
− If desired, the user can add five more inside parties to the conversation (for a total of
six inside and two outside parties).
− Another extension user can join (break into) the Conference using Break-In as long
as the total number of inside parties does not exceed six.
Station Application:
KTS, SLT
Operation:
To establish a Multi-Line Conference:
<KTS>
1. Establish first outside call.
2. Press CONF key. Call is put on Hold.
3. Establish second outside call.
4. Press CONF key. Conference is established.
To Next Page
Loading...