Station Application:
KTS, SLT
Operation:
To activate Call Forward:
<KTS>
1. Press SPK key.
2. Press ICM key (824/1232/2464) (See note 1).
3. Press TRFR key.
4. Dial destination extension number.
5. Dial option code (0-3) (See note 3).
− One short beep sounds as confirmation.
− One long beep means calls cannot be rerouted to that extension (824).
− 3 Splash tone means calls cannot be rerouted to that extension (1232/2464).
6. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code (See note 2)
3. Dial Destination extension number.
4. Dial option code (0-3) (See note 3).
5. Hang up.
Note 1: If program #75-D is 0 (No Tone), skip step 2 (824/1232/2464).
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 63
Dial Plan 2 0 0 953
1 9 053
Note 3: Option codes are as follows:
0 => Call Forward Immediate
1 => Call Forward when Busy
2 => Call Forward when Unanswered
3 => Call Forward when Busy/Unanswered
To cancel Call Forward (at originating and destination extension):
<KTS>
1. Press SPK key.
2. Press ICM key (824/1232/2464 only) (See note 1)
3. Press TRFR key twice.
4. Press SPK key.
To Next Page
Loading...